Guides

• 

  Creating a Bootable USB with Rufus

  A step-by-step guide on how to create a bootable USB drive using Rufus.

  Read Guide
• 

  Downloading Windows 10 on a PC using the Media Creation Tool

  Follow these steps to create installation media (USB flash drive or DVD) you can use to install a new copy of Windows 10, perform a clean installation, or reinstall Windows 10. Source: microsoft.com

  Read Guide

  Follow these steps to create installation media (USB flash drive or DVD) you can use to install a new copy of Windows 10, perform a clean installation, or reinstall Windows 10.

  Before you download the tool make sure you have:

  • An internet connection (internet service provider fees may apply).
  • Sufficient data storage available on a computer, USB or external drive for the download.
  • A blank USB flash drive with at least 8GB of space or blank DVD (and DVD burner) if you want to create media. We recommend using a blank USB or blank DVD, because any content on it will be deleted.
  • When burning a DVD from an ISO file, if you are told the disc image file is too large you will need to use Dual Layer (DL) DVD Media.

   

  Check a few things on the PC where you want to install Windows 10:

  • 64-bit or 32-bit processor (CPU). You’ll create either a 64-bit or 32-bit version of Windows 10. To check this on your PC, go to PC info in PC settings or System in Control Panel, and look for System type.
  • System requirements. Make sure the PC meets the system requirements for Windows 10. We also recommend going to the PC manufacturer's website for additional info about updated drivers and hardware compatibility.
  • Language in Windows. You'll need to choose the same language when you install Windows 10. To see what language you're currently using, go to Time and language in PC settings or Region in Control Panel.
  • Edition of Windows. You should also choose the same edition of Windows. To check what edition you're currently running, go to PC info in PC settings or System in Control Panel, and look for Windows edition. Windows 10 Enterprise isn’t available in the media creation tool. For more info, go to the Microsoft 365 admin center.
  • Microsoft Office products. If you just purchased a new device that includes Office 365, we recommend redeeming (installing) Office before upgrading to Windows 10. To redeem your copy of Office, please see Download and install Office 365 Home, Personal, or University on your PC. For more information, check How to upgrade to Windows 10 on new devices that include Office 365.

   

  Using the tool to create installation media:

  1. Select Download tool now, and select Run. You need to be an administrator to run this tool.
  2. If you agree to the license terms, select Accept.
  3. On the What do you want to do? page, select Create installation media for another PC, and then select Next.

  4. Select the language, edition, and architecture (64-bit or 32-bit) for Windows 10. This table will help you decide which edition of Windows 10 you’ll choose:

     Your current edition of Windows	Windows 10 edition
     Windows 7 Starter Windows 7 Home Basic Windows 7 Home Premium Windows 7 Professional Windows 7 Ultimate Windows 8/8.1 Windows 8.1 with Bing Windows 8 Pro Windows 8.1 Pro Windows 8/8.1 Professional with Media Center Windows 8/8.1 Single Language Windows 8 Single Language with Bing Windows 10 Home Windows 10 Pro	Windows 10
     Windows 8/8.1 Chinese Language Edition Windows 8 Chinese Language Edition with Bing	Windows 10 Home China​

      

  5. Select which media you want to use:
     • USB flash drive. Attach a blank USB flash drive with at least 8GB of space. Any content on the flash drive will be deleted.
     • ISO file. Save an ISO file to your PC, which you can use to create a DVD. After the file is downloaded, you can go to location where the file is saved, or select Open DVD burner, and follow the instructions to burn the file to a DVD. For more info about using an ISO file, see Additional methods for using the ISO file to install Windows 10 section below.
  6. After the installation media is created, follow the steps below to use it.

  7. After completing the steps to install Windows 10, please check that you have all the necessary device drivers installed. To check for updates now, select the Start button, and then go to Settings > Update & Security > Windows Update, and select Check for updates. You may also wish to visit your device manufacturer’s support site for any additional drivers that may be needed.

     Note: Drivers for Surface devices may be found on the Download drivers and firmware for Surface page.

     Using the installation media you created (click to show more or less information)

     Before you install Windows 10, it’s a good idea to save any work and back up your PC before you start. If you used the media creation tool to download an ISO file for Windows 10, you’ll need to burn it to a DVD before following these steps.

     1. Attach the USB flash drive or insert the DVD on the PC where you want to install Windows 10.
     2. Restart your PC.

        If your PC does not automatically boot to the USB or DVD media, you might have to open a boot menu or change the boot order in your PC's BIOS or UEFI settings. To open a boot menu or change the boot order, you'll typically need to press a key (such as F2, F12, Delete, or Esc) immediately after you turn on your PC. For instructions on accessing the boot menu or changing the boot order for your PC, check the documentation that came with your PC or go to the manufacturer's website. If you do not see the USB or DVD media device listed within the boot options, you may need to reach out to the PC manufacturer for instructions for temporarily disabling Secure Boot in your BIOS settings.

        If changing the boot menu or order doesn't work, and your PC immediately boots into the OS you want to replace, it is possible the PC had not fully shut down. To ensure the PC fully shuts down, select the power button on the sign-in screen or on the Start menu and select Shut down.

     3. On the Install Windows page, select your language, time, and keyboard preferences, and then select Next.
     4. Select Install Windows.

      

     Additional methods for using the ISO file to install Windows 10 (click to show more or less information)

     If you downloaded an ISO file for Windows 10, the file is saved locally at the location you selected. If you have a third-party DVD burning program installed on your computer that you prefer to use for creating the installation DVD, that program might open by going to the location where the file is saved and double-clicking the ISO file, or right-click the ISO file, select Open with and choose your preferred DVD burning software.

     If you want to use the Windows Disk Image Burner to create an installation DVD, go to the location where the ISO file is saved. Right-click the ISO file and select Properties. On the General tab, click Change and select Windows Explorer for the program you would like to use to open ISO files and select Apply. Then right-click the ISO file and select Burn disc image.

     If you want to install Windows 10 directly from the ISO file without using a DVD or flash drive, you can do so by mounting the ISO file. This will perform an upgrade of your current operating system to Windows 10.

     To mount the ISO file:

     1. Go to the location where the ISO file is saved, right-click the ISO file and select Properties.
     2. On the General tab, click Change… and select Windows Explorer for the program you would like to use to open ISO files and select Apply.
     3. Right-click the ISO file and select Mount.
     4. Double-click the ISO file to view the files within. Double-click setup.exe to start Windows 10 setup.
• 

  How to activate Windows XP using this program

  Follow these steps to activate Windows XP as the servers are down.

  Read Guide

  1. Download this program

  2. Run the program

  3. Click "Get from the system"

  4. Then click "Store to the system"

  5. Enjoy your activated Windows XP!